Scaffolding Tube and Coupler

CONDOR Tube and Coupler scaffolding is simple, versatile and inexpensive. This type of CONDOR scaffold allows to assemble components by orthogonal couplers. This scaffold is used both in civil and industrial building, providing usages is compliance with Ministerial Authorizations: recovery of artifacts, support structures, stiffening and reinforcement of dangerous buildings, maintenance and restoration of extremely complex or degraded architectural works.

Scaffolding system allows connection of two tubes, in any position and at any distance, allowing the realization of particular/unusual and irregular forms where a high resistance and great flexibility is needed/required. This is why it is particularly useful in restoration work, support, the shoring of crumbling walls and other such work.

Scaffolding with tube and couplers

Here are some of the characteristics of the scaffolding Tube and Coupler Condor:


Steel – Cold Stamped - High resistance


Tropicalised - Min. 8 micron


- Scrolling Load capacity: 1100 daN
- Tensile strength - Accia-I: S355JR 430 ÷ 550 N/mm2
- Yield strength - Steel: S355MC N/mm2
- Elongation - Steel: S355MC 23%


- Steel: S235JR


- Dip painting
- Hot dip galvanizing, guaranteed minimum average thickness: 55 micron


- Outside diameter: 48.3 mm - Nominal thickness: 3.20 mm
- Cutting length (ml): 0.60 1.20 1.80 2.00 3.00 3.60 4.00

See also

Other information of section Scaffolding

Do you have special requirements?

Ask us to provide you with a technical advice on our scaffolding and formwork systems. Contact us to get a FREE and CUSTOMISED QUOTATION.